New 60 Gallon Sandblast Cabinet Sand Blaster Air Tool w/ 40lb bottom feed hopper

I bought this a WHILE back and it arrived in a very smashed and damaged box. Looked like it was used and repacked. Anyways, i have a small machine shop so I figured I could bend out the pieces to make it work. I opened the entire product and after unpacking it realized it did not have any instructions or bolts/screws with it. I contacted the seller and asked to ship me one, as I thought I was doing them a favor and keeping the damaged product, just need some guidance to put this thing together. Never received one or any emails back. So now I still have a pile of parts that are pretty much useless. I work 70 hours a week so time is a luxury with me, and this is quite a rip off. Buyer beware!!!!!! There is so many pieces in this product that it would take 2 hours on a easy day with the instructions!!!!!

i received the shipment, 90% of the parts for the cabinet were severely damaged. i sent pictures and they offered to send replacement parts..i was upset, but found that to be acceptable. i opened the box of replacement parts to find they were all damaged ..some at least as bad as before, others far more so..almost like a joke... completely creased seams at the connections etc. i can maybe condone 1 part making it through..but almost the whole set up..TWICE ..i think not. avoid this seller. if they dispute this claim i would be more than happy to supply 2 sets of photos..if it didnt cost me more than i would win, id take them to small claims court.

Buy New 60 Gallon Sandblast Cabinet Sand Blaster Air Tool w/ 40lb bottom feed hopper Now

If you assemble this with a bead of caulk on EVERY seam, you shoudl be able to use it succesfully. Mine leaked horribly with the minimal seal that came with it.

Read Best Reviews of New 60 Gallon Sandblast Cabinet Sand Blaster Air Tool w/ 40lb bottom feed hopper Here

This cabinet is of a very poor quality! Luckily my package arrived undamaged and with no missing parts. However, even if you carefully follow all instruction this assembly won`t stand a pressure it was intended to: IT LEAKS BADLY! From everywhere! I had to disassemble the unit and then re-assemble using generous amounts of caulk. Not as bad but it still leaks it`s just a big junk box, use it to store things but to work with high pressure applications. I`m getting rid of this!

Want New 60 Gallon Sandblast Cabinet Sand Blaster Air Tool w/ 40lb bottom feed hopper Discount?

First realize this product is a kit, not a finished assembled product!! That said, my kit I got arrived in quite good shape. Understanding that it is a collection of thin metal pannels,and other hardware, and perhaps a million small nuts bolts and washers. The actual product box was inclosed in an outer shipping box. Perhaps the model that I recieved was updated because it appears as though there was considerable packaging effort to get it to me safe. There was even plate glass for the window that made it to me unscathed! One or two of the pannels were a bit damaged.

Next important point.... It is NOT a one man job to assemble!!!! so dont even try to do this solo. I am mechanically inclined and I work on cylinder heads as a hobby but still putting this thing together was daunting.

Third. It will take several hours. But is it well worth it to invest the time to build it right the first time. Tighten those fastners like you dont ever want to have to touch them again.

Fourth. Follow another reviewer's advice and seal up the seams with caulk. My kit came with rolls of adhesive foam strip seals but this is easily damaged when putting together the main chamber.

There was a fault in the gun supplied with my kit but after a thorough inspection, I saw the bit of metal left from machinin the gun which was blocking the media passage into the air stream. I got rid of that and the unit worked fine with some medium grit black beauty that I got.

So why did I give this four stars? In a word, price! For the price I think its well worth it. Once you get it together, and get it sealed it does the job it was designed to do perfectly. The only reason I would pay 100 bucks more for a simmilar cabinet was if it came assembled... that is the only thing that would justify the price.

I also appreciate the fact that the unit came with an assortment of ceramic nozels and several replacement plastic sheilds for the viewing screen. I've made some mods so that it functions better for me. This included longer hoses for the gun, both for the media feed and for the air. I find I also need more light inside of the cabinet.

I'm pleased with the product.

Makita 772209-A No. 6 by 1-5/8-Inch Phillips Coarse Thread Drywall Screw (1,000 per Box)

• Coarse thread
• 1,000 per box

The screws drive into the wall nicely, hold well and run through the driver. There is not much to say about them, but when combined with the self feeding driver they do make hanging drywall a lot easier and faster.

Save 13% Off

Hitachi NT65MA2 15 Gauge 1-1/4-Inch to 2 1/2-Inch Angled Finish Nailer

• Designed with integrated air duster for clearing away dust and debris
• Made with lightweight aluminum body and durable composite magazine
• Easy to operate with simple depth of drive adjustment, easy clear nose, and adjustable air deflector
• Includes safety glasses and carrying case
• Covered by 5-year warranty

I currently run five Hitachi, three Senco, and two Max finish nailers. The Hitachi NT65MA2 is the best nailer I have. It is very light with minimal recoil. It has enough power to sink nails in maple effortlessly. It is stone cold reliableit has never broken a driver after five years of fulltime use (bought my old NT65MA in 98). The safety works well without marring. It shoots the Senco DA series (also UA) nail which has become the defacto industry standard. Hitachi appears to have spared no effort in designing and building the best 2 1/2" finish nailer.

Buy Hitachi NT65MA2 15 Gauge 1-1/4-Inch to 2 1/2-Inch Angled Finish Nailer Now

As a custom homebuilder, I love high quality tools. I've had the opportunity to use many 15 gauge finish nailers throughout the years, and my hands down favorite is the Hitachi, for several reasons. It's by far the most reliable 15-gauge I've used. I run some HItachi's that are over 5 years old, and I've never had a problem with any of them. The balance of this gun is exceptional. To me balance of the gun is one of the most important features. I've run Bostitch, Senco, and Porter Cable, and I believe this gun is balanced better than any of them. The built in dust blower is also a great feature.

If this gun cost twice as much, I'd still use it, but the fact you can get it cheaper than most other 15 gauge nailers is just icing on the cake. If you're looking for the best 15 gauge nailer, this is it.

Read Best Reviews of Hitachi NT65MA2 15 Gauge 1-1/4-Inch to 2 1/2-Inch Angled Finish Nailer Here

i bought this nailer several months ago. great finish gun. the little button near the top/side of the gun is an air blower. great to have available when doing base, to blow away the crumbs from falling plaster or debris that is in the way. just push and it blows it away, nice added feature that the others don't have. have had no problems and would recommend this highly

Want Hitachi NT65MA2 15 Gauge 1-1/4-Inch to 2 1/2-Inch Angled Finish Nailer Discount?

I've been using the Hitachi NT65MA for over three years now on remodeling jobsites. The only difference between the NT65MA that I use and the newer NT65MA2 is that you can bump fire the NT65MA. I suppose the Hitachi people felt that bump firing a finish nailer was uncalled for or dangerous, but I think it's great in some situations.

I've used Senco and Bostitch finish nailers on various jobs, but I think the Hitachi is superior because it has the best combination of balance, reliability, and power. It can easily handle all trim (from fir to rock maple) and light framing (door and window setting, drywall backout framing) applications, and never misfires. The only times I've had to clear nail jams have been when nailing trim to an old plaster over brick wall, and even then, only if the backing brick was very dense or hard.

At first I thought the air blower was a gimmick, but I've found it to be very helpful when I've had to blow away drywall or plaster debris and dust. This happens surprisingly often, especially if the drywallers didn't do a great job and I've had to bash out places where they've put on too much mud or have encroached on rough openings too much.

I've modified my nailer by attaching a circular saw rafter hanger to it by drilling through the magazine and cutting out the case to accommodate the hanger. Recently it has started to leak air a bit, but this is to be expected after 3 years of continuous use and abuse (it's been kicked, dropped 10 or so feet multiple times, thrown about, left in very dusty locations, rained on, etc.). A sealing rebuild is easy enough to come by anyway.

As for the choice of nails, I've never had any trouble with any brand of nails in this tool (unlike another reviewer mentioned), but I prefer to use Senco's 2.5 inch long galvanized ones.

I wouldn't hesitate to buy this nailer again.

Save 34% Off

I had a 15 ga. Bostich that mysteriously took flight from my job site. I'd heard good things about Hitachi so I bought this one even though it was $50 more than the Bostich. I also took a hit because my Bostich nails won't work in my Hitachi. I didn't realize that when I bought it. However, I really like the Hitachi better especially the nails because they have slightly bigger heads and less glue stuff on them. Both nailers performed flawlessly. I like that little air valve on the Hitachi. Sometimes, I hit it by accident when reaching for the nailer and get a plast of air in my face. Other times, I use it to blow off my saw and tools and to empty my air tank before loading them up. I'd buy it again and really wish my framing nailer was an Hitachi.

Campbell Hausfeld DH5300 1-Quart General Purpose HVLP Spray Gun

• General purpose spray gun adaptable to a wide range of applications
• Easily changes from siphon to pressure feed with the twist of a knob
• Pattern control adjusts fan size for better results; convertible from non-bleeder to bleeder-style for use with standard or tank less air compressor
• Includes 1/4-inch male NPS air inlet; works with paint tanks and remote canisters
• Weighs 2.7 pounds

This spray gun has everything that a amateur would need. It works great I sprayed 14 pre-primed doors in about 4 hours, they took one coat, and it was a mirror finish. You can not ask for anything more from a spray gun in this price range. Be prepared to have a lot of overspray as is to be expected with any spray gun.

Buy Campbell Hausfeld DH5300 1-Quart General Purpose HVLP Spray Gun Now

I did a lot of research prior to purchasing this spray gun.(has both pressure and siphon features with an easy switch knob).

I previously had a Binks model 35 that was just super but now discontinued.I replaced it with a Binks Model 25 that lasted one spray session. I recently sprayed acrylic enamel with this gun and it worked flawlessly.

This gun hopefully will spray latex and most liquids. The nice thing about Campbell Hausfield is that on their web page you can purchase individual parts or parts kits. I purchased a O ring gasket kit for $15.00.

After using and while cleaning this gun I discovered a broken seal. I called CH and they sent a replacement part immediately. So I give a A for both Amazon and CH.

Read Best Reviews of Campbell Hausfeld DH5300 1-Quart General Purpose HVLP Spray Gun Here

Works as advertised. Much better for small projects than the airless sprayer I was using. Clean-up is a snap after use, with very little wasted paint.

Want Campbell Hausfeld DH5300 1-Quart General Purpose HVLP Spray Gun Discount?

I have used this model for over 20 years and I believe it to be the best on the market.

Amazon gave me the best deal on my replacement.

Ron

Save 22% Off

I am a self employed painter who does a lot of spraying(furniture,cabinet doors,louvered doors).This is the best versitile,durable,relatively trouble free gun I have found.It is also cheaper at amazon than it was at Home Depot

which no longer carrys it.

Neiko Heavy Duty Air Needle Scaler with Flux Chisel - 4500 BPM

• The ideal tool for scaling and rust removal
• 4500 blows-per-minute increases work speed
• Comes with 19 high-tension steel needle & flux chisel
• One-year warranty

I bought this tool because of price. It is priced on the low end of the spectrum and this is a tool that I will not use every day. I have used the tool several times and have found no shortcomings or defects. It works as it is supposed to. I'm happy with what I spent and what I got for the money.

Buy Neiko Heavy Duty Air Needle Scaler with Flux Chisel - 4500 BPM Now

This works very good to remover paint, but there is a very big problem with its design. The needles have a nail head that keeps the needles from falling out of the holder. After 2 to 3 hours all the needles start to fall out, because the heads wear off the needles that hold them into the tool.I ordered 5 extra sets of needles and the same thing happened to all 5 sets. So I had to braze a ball of metal on the heads of all the needles to replace the heads that wore off. Then after 2 to 3 hours the brazed heads wore off also and the needles fell out again. Then the return spring broke. If you don't mind having to braze the heads back onto the needles as they fall out this tool works very good, but I talked to other people that had needle scalers and they all said they never had problems with the needles falling out, only that the needles would wear down after so much time. By grinding the needles to a point, they remove the paint allot faster, but the points wear off after about 30 minutes. I would not recommend this tool. Find one that the needles do not fall out of after 2 or 3 hours.

17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR PUMP

• 5 to 5.5 HP motor
• Rated pressure: 145 PSI
• Pump speed: 655 RPM to 1050 RPM

Wasn't aware of how much TROUBLE I'd have hooking up the pump to our shop compressor.

Metric flare fittings OUT and made a major project out of trying to get the thing plumbed to our unit.

Left a phone message with the vendor (in So Cal) and never had so much as a return effort.

Would have appreciated a reply even if it was to indicate that we were "on our own".

Finally managed to get it "plugged in" after two weeks of parts shopping, $120 in fittings & pipe, and days of R&D and in house fabrication.

Just got it started today. Seems to be working but makes some knocking noises.

Guess we'll have to wait and see.

Wouldn't recommend it unless its a direct replacement of the same unit or similar with the same fittings.

Buy 17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR PUMP Now

Not sure who gave it 5 stars, must have been someone from there company. Metric flare output is impossible to find a fitting for. I ended up re-threading it. Once I got it going, it produced about 3 cfm. When I contacted the company they said that was not possible and hung up on me :)

Read Best Reviews of 17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR PUMP Here

a ++++++ +++ ++ + +++ ++ +++++ + ++ +++ ++ ++ ++ + ++ ++ + + 1

1/4" NPT Compressor Drain Petcock

• Compressor Tank Drain Valve
• Pre-applied thread sealant for air tight connections
• Replacement for old leaky or stripped tank drain valves
• Solid brass construction

I had to replace the Drain Petcock on my Craftsman 26 Gallon Compressor. Bolts right in. Wish I would have purchased a valve type assembly rather than a screw type, but as an OEM replacement part I have no complaints with this product.

Buy 1/4" NPT Compressor Drain Petcock Now

my old drain valve "O" ring gasket wore out, bought this one and it works just great. Not much to say...it's a drain valve, threw it in and no more air leaks.