Ampro AR3710 Air Grease Gun

• Lubrication for automotive and industrial work
• 3-way grease loading: cartridge, filler pump and bulk
• Air vent valve releases trapped air pockets
• Delivers 1200-6000 PSI at nozzle to penetrate the most stubborn grease fitting

I set the gun up with a cartridge according to directions to bleed off air blockage and it worked perfect. I had bought a cheaper gun and could never get it to work. This was definitely worth the price for me.

Buy Ampro AR3710 Air Grease Gun Now

This was a Christmas gift for my husband. He's been adding tools to his workshop to use with the air compressor. The gift was a hit.

IIT 10410 Hose Ends 3/8 Inch - 2 Piece

• Repairs damaged or bulk hoses
• Corrosion resistant brass
• 1/4" NPT end connects to tools, fittings, couplers or plugs

I thought I was going to have to buy a new air hose. These work great. I didn't want to be bitten by a hose clamp when I use my air hose, so I didn't install one like they recommend. I shoved the fitting in the hose. It was a very tight fit, and with the barbs on it, it's not coming off. Great price, great fit, fast shipping. I highly recommend these.

ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI

• Mounting bracket hole pattern: 4in. apart (width), 5in. apart (length)
• Heavy-duty rubber stop is adjustable for safe usage
• Four direction non-snag rollers reduce hose wear abrasion
• Mounts on wall, floor or ceiling
• Heavy-duty powder-coated steel constructed wheel

Northern Industrial Air Hose Reel With Hose 3/8in. x 50ft. Hose, Max. 250 PSI

I bought one of these hose reels because the price was so low. It was also to be used infrequently, making it harder to justify an expensive model. We have a Cox Reels auto-rewind air hose in our garage and a Reel Craft model in another location, but those professional-grade brands cost a whole lot more.

Pros:

The all-steel rewind mechanism works well and is sturdy. It's easy to find a lock point when unwinding the hose and just as easy to rewind all of the hose when you're done. There's plenty of room for 50' of 3/8" air hose.

The steel frame is strong. For example, the plate that attaches to the wall is nearly 1/4" thick.

The swivel mechanism where the air hose connects to the reel is brass.

Inexpensive.

Cons:

Throw a few coins into a large metal can and giggle it vigorously. That's the sound you'll hear from this reel when the hose unwinds or rewinds. (The noise comes from the rewind spring clanging on the inner and outer sheet metal spring-housing covers.) I put 1/8" thick stick-on foam on that cover, but the reel still sounds like it has loose parts.

After one year, the rubber hose broke apart, about 4" from the end. It didn't just leak, the end actually fell off. The ENTIRE hose had deep cracks over its entire length, so it was unrepairable. I replaced it with a genuine Good Year air hose. By contrast, the original air hose on our Cox Reel still looks fine after nearly 20 years.

Summary:

I should have bought a Cox Reel, Reel Craft, or other quality reel, rather than trying to save a few dollars with this brand.

Buy ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI Now

I read the reviews before I bought mine. The 25 and 50 foot ones are the same just comes with different length hose (sorry to insult your intelligence). I use them on average 2-3 times a week, so not a whole lot of use and so far they are doing well. Can't complain. I just didn't have the $$ for a $300.00 one and I don't use it as often as a commercial shop. It arrived on time, no dents, missing parts, etc.

Read Best Reviews of ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI Here

Worked Great for about 18 months ... until the hose gets hairline cracks in it and leaks (the entire length). Now I have to find a replacement hose, what a PITA.

Want ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI Discount?

This reel works well and as it says it's supposed to. I use it lightly because it's just in my home garage. This reel is not heavy duty and you can tell it wouldn't last long in an industrial shop. For home use this is exactly what I was looking for. My dad has a much stronger commercial hose reel and the spring action is much stronger on his but for the price, this does the job well. Yes, the host on this seems cheap and I don't think it will last the life of the reel but.... it's not that expensive of a reel! You get what you pay for... if you want the best, this isn't it... if you want to get the job done and are not using it daily, this is a great choice!

Ingersoll-Rand 2131-TK2 1/2-Inch Impact Wrench Tune-Up Kit

• 1/2" Impact Wrench Hammer and Anvil Kit for use with 2131A

My 16-17 year old 2131 lost its powerit couldn't remove lugnuts. I was set to buy a new gun but figured I'd try to rebuild it. Installed the rebuild parts and the gun is almost like new! Notethe vanes I received were a different shape than the originals. The originals were symmetrical if laid out flat, but the new ones had a small cut out on the bottom on one side. I put the cut out towards the back of the gun and it works great. The picture that comes with the kit shows the old vanes.

Buy Ingersoll-Rand 2131-TK2 1/2-Inch Impact Wrench Tune-Up Kit Now

Ive been a mechanic for about 10 years. When I first started I purchased an Ingersoll Rand 2131. Finally it started getting weak and would give me problems once in a while. Figured I would try to rebuild it instead of buying a new one. This kit is awesome. Comes with every little seal and gasket and all the vanes. Gun works like it is brand new!

Read Best Reviews of Ingersoll-Rand 2131-TK2 1/2-Inch Impact Wrench Tune-Up Kit Here

This is an original equipment kit and thus all the parts are exactly right. My only complaint is that the instructions are not great for first-time impact wrench repairers like myself, but I was able to figure it out.

Now my wrench has the same oomph it did when I first bought it ten years ago. Yeah!

Want Ingersoll-Rand 2131-TK2 1/2-Inch Impact Wrench Tune-Up Kit Discount?

It turned my old tool that stopped working into a brand new impact again. I love it. Buy this if you're having problems

Save 53% Off

My "Thunder Gun" Ingeroll Rand 2131 had given years of flawless service. Then, all of a sudden , when air pressure was attached, the gun would NOT stop running. Strange problem. This Tune up Kit repaired my Air Impact to like new condition. It was a snap to install also.

Campbell Hausfeld FP2028 1-Gallon Oil-Free Pancake Air Compressor with Accessory Kit

• User-friendly design
• Easy-to-read gauge
• 100 max PSI
• Tank eliminates the pulsations caused by piston action
• Accessory kit contains 25-foot recoil hose, female coupler, male plug, air chuck, inflation needle, 2-inch inflation nozzles

I bought this to use with surebonder's 9615 upholstery staple gun to reupholster a bunch of chairs. it works great. i'm rather impressed. it is really tiny, easy to use and i'm surprised that it makes no mess of any kind. i sit right on my dinning table to use it. it was loud but not as loud as some reviews made it out to be. the trick is to use it on a piece of carpet. it also is not nearly as loud in a normal room of your house as it is if used in an empty room that has a hard floors and no furniture such as garage or cement basement.

my only gripe was that it took me several days to figure out why i couldn't connect it to the staple gun. it does not come with a male quick connector that is needed to attach the hose to power tools. i bought this at home depot for under $2.

i read many reviews that complained of it not working. after using it this month i can kind of understand why. it's not the compressor. if you have not used one before i will give you the short list of resons it won't work that all happened to me until i got used to using a compressor.

there is a knob under it that lets it dry between uses. you must close it tightly before using it.

you need to really, really tighten the hose onto the compressor before use.

if you over oil your air tools or always leave them connected, the oil will seep into the male connector at end of hose and trap condensation. if this happens, you will need to wipe out the connector with a paper towel until it feels dry again.

at the end of long work days you'll want to let it dry out. you should take the hose off and hang it so both ends hang down and open the drain knob underneath. I have found it to work super efficiently since i started to do this. now i don't need to keep running it to keep at 60 80 psi. although i do have to turn it on ever 10 or 20 minutes for about 30 seconds to keep the psi.

Buy Campbell Hausfeld FP2028 1-Gallon Oil-Free Pancake Air Compressor with Accessory Kit Now

I bought this compressor because I wanted a small tank-based compressor for my garage for keeping my car and bike tires filled and for filling basketballs and soccer balls.

I have had it for about a month now and it works great for what I bought it for.

The good:

1. Its small and light, easy to pick up and move around. Does not take up much space in my work area. It has plenty of power for filling tires and basketballs.

2. Great price.

3. Easy to use.

The bad:

1. Noisy. I read other reviews that said it was loud, but in use, it is louder than I expected. With the small tank, the motor ends up runninng most of the time I am using it. I find I have to wear ear protection when I am using it, even when I am outside in the driveway.

2. Light weight. Being light weight is nice when I want to pick it up and carry it around the house and garage, but it has its downside. It came with a 25 foot coiled air hose and when you get the cord extended out 8-10 feet, it tips the compressor over on its side.

That's the good and the bad. Works great for what I need it for. I don't need a compressor for air tools, so I did not want to get a bigger compressor because it takes up too much room around my workbench. I used to use a small electric compressor without a tank, but it took too long to fill up car tires. This Campbell Hausfeld works perfect for what I need. I would buy it again.

Read Best Reviews of Campbell Hausfeld FP2028 1-Gallon Oil-Free Pancake Air Compressor with Accessory Kit Here

This air compressor does not hold a lot of air one gallon to be exact. However, it fills to its maximum 100 psi relatively quickly and once there, will add about 6 or 7 psi to my each of my car tires. This is plenty to air up a tire and by the time I go to the next tire and check it's pressure, the compressor is back to 100 psi and ready to go. For me and my needs, which are not commercial or professional, this thing does the trick for the right price.

Want Campbell Hausfeld FP2028 1-Gallon Oil-Free Pancake Air Compressor with Accessory Kit Discount?

My wife bought this for me for Christmas a year and a half ago. I used it to inflate car tires a few times a year. A few months ago the pressure would not build past 42lbs. After some troubleshooting I replaced the safety valve for about 24.00 (Sears Parts Store). Still would not build. I ended up taking apart the piston assembly, it looked fine no burnt or scratched valve no bad piston ring. Re-assembled and it was fixed! 100lbs psi again. Two days later down to 25lbs. This thing is loud and after taking this apart I can see why its cheap. The only replacement for the piston I can find is the whole motor/piston assembly which is probably more than a new compressor. Look elsewhere for a better quality unit.

Save 58% Off

I bought this air compressor to use for airbrushing. I need 20-40 psi and less than 1 cfm. This compressor will generate 100 psi. Here is the funny part... the instruction sheet says for break-in you should turn the regulator valve clockwise all the way and leave it open (no hose, etc) and run for 5 minutes before using. Fair enough. No regulator... no valve... the think runs 100 psi and just splills that out into what ever you hook up to it. You would have to add a regulator to it. The other joke... it was so incredibly loud it was louder than my 6 HP 60 gallon upright compressor in my garage!!! Ran it in my basement with the doors and windows shut and my wife was concerned the neigbors Easter dinner would be unejoyable in their homes in the neibhorhood around the house. The noise was incredible... I would say equivalent to a Jet air craft taking off in close proximity in terms of decibles. I have been exposed to two of Campbell Hausfeld's compressors... both were the worst pieces of engineering garbage I have ever seen. No reflection on Amazon please.

Campbell Hausfeld PW2575 2,500 psi 2.4 gpm Honda GCV160 Gas-Powered Pressure Washer with 25-Foot Hos

This product arrived in non-working/defective order and Amazon has a policy of not accepting returns on this type of equipment, yet the manufacturer refuses to take any responsibility for this defective product. I'm still trying to resolve the situation with Amazon and with Campbell Hausfeld, which by the way, keeps you waiting on their customer service line for over an hour even in off hours. I've ended up purchasing another better pressure washer from the local Home Depot that was better quality and lower price just to get the job I needed done.

In more detail, it appears that Campbell Hausfeld does not bother to properly empty the oil out of the unit, contrary to the shipping requirements of Fedex (who delivered this) and other shippers. The oil saturated the sparkplugs, air filter and other parts of the engine. I'm not engine expert so that is just one problem; I would not be surprised if there are others.

If I was a first time customer with Amazon, this would be enough to never come back, but I definitely will never ever buy anything from Campbell Hausfeld again.

I'd suggest you check with the manufacturer first before buying anything from Amazon that is not returnable, such as any gas-powered equipment, and also check prices at Home Depot I certainly wish I had never made this purchase.

Bought this power washer to replace one we had for years and it finally gave up the ghost! We've always been satisied with Campbell Hausfeld before and are pleased with this unit.

Buy Campbell Hausfeld PW2575 2,500 psi 2.4 gpm Honda GCV160 Gas-Powered Pressure Washer with 25-Foot Hos Now

This is really good piece of equipment. The reason i am not given all the stars, is because I had some trouble installing the high pressure hose at the outlet. Other than that, easy to start, easy maintenance, and works really well.

Read Best Reviews of Campbell Hausfeld PW2575 2,500 psi 2.4 gpm Honda GCV160 Gas-Powered Pressure Washer with 25-Foot Hos Here

Primefit CM02006 Oil Lubricated Portable Air Compressor, 6-Gallon

• Oil-lubricated pump for longer life and quieter operation than traditional oil free units
• Ideal for use with Nailers, Blow guns, Tire Inflation tools, and other light air consumption tools
• Unit features a max pressure of 115PSI, and an air delivery of 3.5 CFM at 90 PSI, and 4.5 CFM at 40 PSI
• Portable compact design with 6-Gallon tank and wheels for easy storage and portability
• 1 Year Limited Warranty

My sister had me buy this for her husband who is in construction and does various side-jobs. Works great he loves it and the portability

Buy Primefit CM02006 Oil Lubricated Portable Air Compressor, 6-Gallon Now

This is a good air compressor for the price. The only problems I've found with it is that it'll have a hard time starting when it's in a cold environment and itll run my impact gun, but not really strong. But for the price you really won't find a better compressor.