General Tools 800-12 12-ounce Brass Plumb Bob

• Been a staple of the masonry, carpentry and surveying industries for more than 50 years
• Center less ground and balanced to precision tolerances, these lacquered and polished Plumb Bobs afford only the most exact plumb lines
• Hardened steel point is accurate to within 1/100? and is easily replaceable

I had a cheapo chrome plumb bob for years, and found this one on sale and knew I had some layout work coming up, so I bought it, it is much easier to use and more accurate because the shape allows you to see the point more easily than the one I am going to put on a table at the garage sale, which is flat sided except for the last 3/4 inch, making it more difficult to actually look down at the point, which is the business end. Until I used a good one, didn't know there was a difference.

I don't need one all that often, but it is so pretty, makes me want to hang it up in the house somewhere, maybe on a beaded brass chain.... until I need it again.

;-)

Save 24% Off

Goodyear 46561 1/2-Inch by 25-Foot 300 PSI Rubber Air Hose

• Solid Brass End Fittings: 1/2-Inch NPT (M)
• Spiral Synthetic Yarn Reinforcement
• Abrasion-Resistant Rubber Outer Jacket
• 100% Made and Assembled in the USA
• 10 Year Guarantee

This is a heavy duty hose that is quality made. Has a real good feel to it, and I like the flexibility this hose has. I'm really happy with the purchase.

Buy Goodyear 46561 1/2-Inch by 25-Foot 300 PSI Rubber Air Hose Now

This is a high-quality, high-flow hose that stays flexible when cold. This hose, both diameter and length, is an excellent choice when trying to power air-hungry tools such as the Ingersoll-Rand 2135QTIMAX 1/2-Inch Titanium Duty Air Impactool. For such applications, this is a vast improvement over my 50 foot, 3/8 inch, PVC air hose.

Craftsman KK-4835 Compressor Connecting Rod Kit

• This piston kit is used on compressor
• It is used on model number 152912
• This piston kit contains 4 parts
• 5-Inch long, 5-Inch wide, and 8-Inch high
• Package weight of this item is 8-Pound

I cannot believe the value of this product. I have seen kits without the piston for more money, but this is truely amazing. The cylinder was highly polished and it came with everything I needed to put it together, including instructions.

Save 5% Off

Chicago Pneumatic 8940158330 3" Hook & Loop Pad

• replacement pad
• Economical

I used this as an alternative to Meguiar Hook and Loop Pad. Works great, a lot more durable. Highly Recommend.

Buy Chicago Pneumatic 8940158330 3" Hook & Loop Pad Now

This product is yet to be determined. It is a replacement for the original that I have been using about 6 months. Hopefully it will last longer than the original that came with the sander.

New Pressure switch for air compressor 140-175 Single port w/ unloader & on/off lever

• Brand New LeFoo Pressure switch 140-175 Four port with unloader & on/off lever
• Factory set 140-175 psi
• FREE SHIPPING

Easy replacement as it was exactly like the old one. Hope it lasts ten years like the one supplied with the compressor.

Buy New Pressure switch for air compressor 140-175 Single port w/ unloader & on/off lever Now

This switch brought a Quincy air compressor back to life. It worked great till it and the compressor burned in a fire.

Industrial Air Contractor CTA9090980.ES 9-Gallon Super Hi-Flo Single Stage Air Compressor, Orange

• 9 HP Honda OHV gas engine with electric start has an automatic low oil shutdown
• High performance cast iron 3 cylinder pump
• 2 center mount turf tread semi-pneumatic tires for increased mobility
• Enhanced structural support under platform transfers vibration to the ground
• Integrated control panel for added control and convenience

I've used this compressor for about 30 hrs so far. Works very well. This is my third compressor. Both of my other compressors were DeWalts, one 5HP and one 9HP. DeWalt stopped making the gas portable compressors, so I decided on the Industrial Air as the next replacement. Below are the + and I have. Overall I really like this compressor. The negative points are all small and are not a real issue with the engine and pump itself. Overall, I would recommend this product.

(+)

Honda Engine works great. Between the engine and three pumps (verses standard two pumps from other companies), the RPM is lower than my other compressors and therefore more quiet.

Customer Tech line is very helpful and I actually get a person to talk to after only a few minutes of wait time.

One of the liquid filled pressure gauges developed a crack within a few hours of use and was leaking fluid, but when I call the Tech line in the manual, the group sent out a replacement and I got it within a few days. Very good turn around time. I think it was a manufacture defect and not an issue with the compressor itself.

Low center of gravity and very stable.

Large gas tank with good run time.

Handles are very heavy duty and overall a solid unit.

It comes with battery start, but no battery. The Honda engine starts so easily that I don't plan on buying a battery. Saved a little money and weight.

The pump fan that the belt attaches to is extra large and moves a lot of air across the pump to help keep things cool. The copper pipes also have heat dispersing fins attached and work well. I think this will help extend its useful life, as my other compressors got very hot and was harder on the parts because of the excessive heat.

(-)

There was very little information on Industrial Air brand until I found out it's partent company is PowerMate Brand and more company information was then available. I think having links between the two would help it sell better.

The refill plug for the compressor oil is made of cheap plastic and I think I'm going to order a spare. I'm afraid that it will crack or break. Everything is so durable on this compressor except for this plug. Other compressors use a metal or stainless steel plug.

This unit is heavier than any compressor I've used before. It's 360 lbs, almost 70 lbs more than my 9 HP DeWalt. Luckily I don't have to move it very often. I would prefer a 17 Gal tank instead of the 9 Gal tank. I think that would reduce the weight (one tank vs two smaller tanks) and also provide more air capacity. The three pumps verses the standard two adds weight also.

The belt was out of alignment when I got it. You have to adjust the motor position to adjust the belt. Not difficult, but not something you want to have to do to a new compressor.

Save 18% Off

INT-360060 Intercomp Air Gauge, 60 x 1 psi - 4"" Glow-in-the-Dark Dial"

My husband sort of makes fun of how large this gauge is, but at the same time it's super easy to use, it glows in the dark, and it's the one he grabs to use.

I have owned and used Intercomp products for 15 years. I have owned this particular gauge for 3 years. I use it to set pressure on motorcycle racing slicks. It is accurate, easy to read, and the fitting swivels making it easy to access valve stems in the center of a motorcycle wheel. It has a check valve so it will hold the pressure until you release it. I didn't really think much about the glow-in-the-dark feature but it has come in handy early in the morning when the sun isn't up yet. Shine a flash light on the face for a 5-10 seconds an it will glow nicely while checking pressures. The silicone boot around the gauge does a great job of protecting it. Be sure and write your name on it. They have a habit of running away:)

Buy INT-360060 Intercomp Air Gauge, 60 x 1 psi - 4"" Glow-in-the-Dark Dial" Now

I've used it for 1 month and it is very easy to use and gives a simple reading. x x x

Read Best Reviews of INT-360060 Intercomp Air Gauge, 60 x 1 psi - 4"" Glow-in-the-Dark Dial" Here

IIT 10010 5 Piece Air Blow Gun Kit

• 5 Piece Air Blow Gun Kit
• Special nozzles for blowing out hard to reach areas and many other uses
• A must for keeping your work area clean and dry
• Contains: 1 air blow gun, 1 tapered rubber tip and 3 needle nozzles
• Gets dirt out of crevices that a brush simply can't reach!

This is good quality, and the tips all fit snugly and work well. Not the best one I've used, but definitely good enough to blow air in any application you may need, and comes at a good price considering all the different attachments included.

Buy IIT 10010 5 Piece Air Blow Gun Kit Now

I bought this to replace the blow gun I've had in my truck for five years that developed a very slight, intermittent air leak in the internal spring valve. After installing this, I decided I'd try out the needle tip included with the gun. Two days after leaving my house, and after using the air gun one time for less than a minute, the needle blew right out of the screw on tip. This really didn't bother me, as I'd never used that type of tip before and therefore wasn't going to miss it this time. The big issue came when after four days I began to hear a fairly loud hiss coming from the sleeper berth of my truck where the air gun is installed. Upon further investigation, I found that the blow gun had developed the same kind of leak, albeit several times worse, that my old one did after close to five years of service.

This was nothing but a waste of time and money.

Read Best Reviews of IIT 10010 5 Piece Air Blow Gun Kit Here

Good price for what you get. The pieces seam solid and hopefully won't break easily. I would recommend this to anyone.

Want IIT 10010 5 Piece Air Blow Gun Kit Discount?

I have not had a problem with this product at all. The little red cushion at the top disappeared a while ago. I recommend taking it off as soon as you get it so you don't have to worry about finding it. It's been over two years now and this baby is still kicking. I Took off the black rubber part and simply use the short metal peice. Others have bought the more expensive ones and this one does the same thing (blow compressed air).

Ampro AR3710 Air Grease Gun

• Lubrication for automotive and industrial work
• 3-way grease loading: cartridge, filler pump and bulk
• Air vent valve releases trapped air pockets
• Delivers 1200-6000 PSI at nozzle to penetrate the most stubborn grease fitting

I set the gun up with a cartridge according to directions to bleed off air blockage and it worked perfect. I had bought a cheaper gun and could never get it to work. This was definitely worth the price for me.

Buy Ampro AR3710 Air Grease Gun Now

This was a Christmas gift for my husband. He's been adding tools to his workshop to use with the air compressor. The gift was a hit.

IIT 10410 Hose Ends 3/8 Inch - 2 Piece

• Repairs damaged or bulk hoses
• Corrosion resistant brass
• 1/4" NPT end connects to tools, fittings, couplers or plugs

I thought I was going to have to buy a new air hose. These work great. I didn't want to be bitten by a hose clamp when I use my air hose, so I didn't install one like they recommend. I shoved the fitting in the hose. It was a very tight fit, and with the barbs on it, it's not coming off. Great price, great fit, fast shipping. I highly recommend these.

ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI

• Mounting bracket hole pattern: 4in. apart (width), 5in. apart (length)
• Heavy-duty rubber stop is adjustable for safe usage
• Four direction non-snag rollers reduce hose wear abrasion
• Mounts on wall, floor or ceiling
• Heavy-duty powder-coated steel constructed wheel

Northern Industrial Air Hose Reel With Hose 3/8in. x 50ft. Hose, Max. 250 PSI

I bought one of these hose reels because the price was so low. It was also to be used infrequently, making it harder to justify an expensive model. We have a Cox Reels auto-rewind air hose in our garage and a Reel Craft model in another location, but those professional-grade brands cost a whole lot more.

Pros:

The all-steel rewind mechanism works well and is sturdy. It's easy to find a lock point when unwinding the hose and just as easy to rewind all of the hose when you're done. There's plenty of room for 50' of 3/8" air hose.

The steel frame is strong. For example, the plate that attaches to the wall is nearly 1/4" thick.

The swivel mechanism where the air hose connects to the reel is brass.

Inexpensive.

Cons:

Throw a few coins into a large metal can and giggle it vigorously. That's the sound you'll hear from this reel when the hose unwinds or rewinds. (The noise comes from the rewind spring clanging on the inner and outer sheet metal spring-housing covers.) I put 1/8" thick stick-on foam on that cover, but the reel still sounds like it has loose parts.

After one year, the rubber hose broke apart, about 4" from the end. It didn't just leak, the end actually fell off. The ENTIRE hose had deep cracks over its entire length, so it was unrepairable. I replaced it with a genuine Good Year air hose. By contrast, the original air hose on our Cox Reel still looks fine after nearly 20 years.

Summary:

I should have bought a Cox Reel, Reel Craft, or other quality reel, rather than trying to save a few dollars with this brand.

Buy ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI Now

I read the reviews before I bought mine. The 25 and 50 foot ones are the same just comes with different length hose (sorry to insult your intelligence). I use them on average 2-3 times a week, so not a whole lot of use and so far they are doing well. Can't complain. I just didn't have the $$ for a $300.00 one and I don't use it as often as a commercial shop. It arrived on time, no dents, missing parts, etc.

Read Best Reviews of ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI Here

Worked Great for about 18 months ... until the hose gets hairline cracks in it and leaks (the entire length). Now I have to find a replacement hose, what a PITA.

Want ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI Discount?

This reel works well and as it says it's supposed to. I use it lightly because it's just in my home garage. This reel is not heavy duty and you can tell it wouldn't last long in an industrial shop. For home use this is exactly what I was looking for. My dad has a much stronger commercial hose reel and the spring action is much stronger on his but for the price, this does the job well. Yes, the host on this seems cheap and I don't think it will last the life of the reel but.... it's not that expensive of a reel! You get what you pay for... if you want the best, this isn't it... if you want to get the job done and are not using it daily, this is a great choice!

Ingersoll-Rand 2131-TK2 1/2-Inch Impact Wrench Tune-Up Kit

• 1/2" Impact Wrench Hammer and Anvil Kit for use with 2131A

My 16-17 year old 2131 lost its powerit couldn't remove lugnuts. I was set to buy a new gun but figured I'd try to rebuild it. Installed the rebuild parts and the gun is almost like new! Notethe vanes I received were a different shape than the originals. The originals were symmetrical if laid out flat, but the new ones had a small cut out on the bottom on one side. I put the cut out towards the back of the gun and it works great. The picture that comes with the kit shows the old vanes.

Buy Ingersoll-Rand 2131-TK2 1/2-Inch Impact Wrench Tune-Up Kit Now

Ive been a mechanic for about 10 years. When I first started I purchased an Ingersoll Rand 2131. Finally it started getting weak and would give me problems once in a while. Figured I would try to rebuild it instead of buying a new one. This kit is awesome. Comes with every little seal and gasket and all the vanes. Gun works like it is brand new!

Read Best Reviews of Ingersoll-Rand 2131-TK2 1/2-Inch Impact Wrench Tune-Up Kit Here

This is an original equipment kit and thus all the parts are exactly right. My only complaint is that the instructions are not great for first-time impact wrench repairers like myself, but I was able to figure it out.

Now my wrench has the same oomph it did when I first bought it ten years ago. Yeah!

Want Ingersoll-Rand 2131-TK2 1/2-Inch Impact Wrench Tune-Up Kit Discount?

It turned my old tool that stopped working into a brand new impact again. I love it. Buy this if you're having problems

Save 53% Off

My "Thunder Gun" Ingeroll Rand 2131 had given years of flawless service. Then, all of a sudden , when air pressure was attached, the gun would NOT stop running. Strange problem. This Tune up Kit repaired my Air Impact to like new condition. It was a snap to install also.

Campbell Hausfeld FP2028 1-Gallon Oil-Free Pancake Air Compressor with Accessory Kit

• User-friendly design
• Easy-to-read gauge
• 100 max PSI
• Tank eliminates the pulsations caused by piston action
• Accessory kit contains 25-foot recoil hose, female coupler, male plug, air chuck, inflation needle, 2-inch inflation nozzles

I bought this to use with surebonder's 9615 upholstery staple gun to reupholster a bunch of chairs. it works great. i'm rather impressed. it is really tiny, easy to use and i'm surprised that it makes no mess of any kind. i sit right on my dinning table to use it. it was loud but not as loud as some reviews made it out to be. the trick is to use it on a piece of carpet. it also is not nearly as loud in a normal room of your house as it is if used in an empty room that has a hard floors and no furniture such as garage or cement basement.

my only gripe was that it took me several days to figure out why i couldn't connect it to the staple gun. it does not come with a male quick connector that is needed to attach the hose to power tools. i bought this at home depot for under $2.

i read many reviews that complained of it not working. after using it this month i can kind of understand why. it's not the compressor. if you have not used one before i will give you the short list of resons it won't work that all happened to me until i got used to using a compressor.

there is a knob under it that lets it dry between uses. you must close it tightly before using it.

you need to really, really tighten the hose onto the compressor before use.

if you over oil your air tools or always leave them connected, the oil will seep into the male connector at end of hose and trap condensation. if this happens, you will need to wipe out the connector with a paper towel until it feels dry again.

at the end of long work days you'll want to let it dry out. you should take the hose off and hang it so both ends hang down and open the drain knob underneath. I have found it to work super efficiently since i started to do this. now i don't need to keep running it to keep at 60 80 psi. although i do have to turn it on ever 10 or 20 minutes for about 30 seconds to keep the psi.

Buy Campbell Hausfeld FP2028 1-Gallon Oil-Free Pancake Air Compressor with Accessory Kit Now

I bought this compressor because I wanted a small tank-based compressor for my garage for keeping my car and bike tires filled and for filling basketballs and soccer balls.

I have had it for about a month now and it works great for what I bought it for.

The good:

1. Its small and light, easy to pick up and move around. Does not take up much space in my work area. It has plenty of power for filling tires and basketballs.

2. Great price.

3. Easy to use.

The bad:

1. Noisy. I read other reviews that said it was loud, but in use, it is louder than I expected. With the small tank, the motor ends up runninng most of the time I am using it. I find I have to wear ear protection when I am using it, even when I am outside in the driveway.

2. Light weight. Being light weight is nice when I want to pick it up and carry it around the house and garage, but it has its downside. It came with a 25 foot coiled air hose and when you get the cord extended out 8-10 feet, it tips the compressor over on its side.

That's the good and the bad. Works great for what I need it for. I don't need a compressor for air tools, so I did not want to get a bigger compressor because it takes up too much room around my workbench. I used to use a small electric compressor without a tank, but it took too long to fill up car tires. This Campbell Hausfeld works perfect for what I need. I would buy it again.

Read Best Reviews of Campbell Hausfeld FP2028 1-Gallon Oil-Free Pancake Air Compressor with Accessory Kit Here

This air compressor does not hold a lot of air one gallon to be exact. However, it fills to its maximum 100 psi relatively quickly and once there, will add about 6 or 7 psi to my each of my car tires. This is plenty to air up a tire and by the time I go to the next tire and check it's pressure, the compressor is back to 100 psi and ready to go. For me and my needs, which are not commercial or professional, this thing does the trick for the right price.

Want Campbell Hausfeld FP2028 1-Gallon Oil-Free Pancake Air Compressor with Accessory Kit Discount?

My wife bought this for me for Christmas a year and a half ago. I used it to inflate car tires a few times a year. A few months ago the pressure would not build past 42lbs. After some troubleshooting I replaced the safety valve for about 24.00 (Sears Parts Store). Still would not build. I ended up taking apart the piston assembly, it looked fine no burnt or scratched valve no bad piston ring. Re-assembled and it was fixed! 100lbs psi again. Two days later down to 25lbs. This thing is loud and after taking this apart I can see why its cheap. The only replacement for the piston I can find is the whole motor/piston assembly which is probably more than a new compressor. Look elsewhere for a better quality unit.

Save 58% Off

I bought this air compressor to use for airbrushing. I need 20-40 psi and less than 1 cfm. This compressor will generate 100 psi. Here is the funny part... the instruction sheet says for break-in you should turn the regulator valve clockwise all the way and leave it open (no hose, etc) and run for 5 minutes before using. Fair enough. No regulator... no valve... the think runs 100 psi and just splills that out into what ever you hook up to it. You would have to add a regulator to it. The other joke... it was so incredibly loud it was louder than my 6 HP 60 gallon upright compressor in my garage!!! Ran it in my basement with the doors and windows shut and my wife was concerned the neigbors Easter dinner would be unejoyable in their homes in the neibhorhood around the house. The noise was incredible... I would say equivalent to a Jet air craft taking off in close proximity in terms of decibles. I have been exposed to two of Campbell Hausfeld's compressors... both were the worst pieces of engineering garbage I have ever seen. No reflection on Amazon please.

Campbell Hausfeld PW2575 2,500 psi 2.4 gpm Honda GCV160 Gas-Powered Pressure Washer with 25-Foot Hos

This product arrived in non-working/defective order and Amazon has a policy of not accepting returns on this type of equipment, yet the manufacturer refuses to take any responsibility for this defective product. I'm still trying to resolve the situation with Amazon and with Campbell Hausfeld, which by the way, keeps you waiting on their customer service line for over an hour even in off hours. I've ended up purchasing another better pressure washer from the local Home Depot that was better quality and lower price just to get the job I needed done.

In more detail, it appears that Campbell Hausfeld does not bother to properly empty the oil out of the unit, contrary to the shipping requirements of Fedex (who delivered this) and other shippers. The oil saturated the sparkplugs, air filter and other parts of the engine. I'm not engine expert so that is just one problem; I would not be surprised if there are others.

If I was a first time customer with Amazon, this would be enough to never come back, but I definitely will never ever buy anything from Campbell Hausfeld again.

I'd suggest you check with the manufacturer first before buying anything from Amazon that is not returnable, such as any gas-powered equipment, and also check prices at Home Depot I certainly wish I had never made this purchase.

Bought this power washer to replace one we had for years and it finally gave up the ghost! We've always been satisied with Campbell Hausfeld before and are pleased with this unit.

Buy Campbell Hausfeld PW2575 2,500 psi 2.4 gpm Honda GCV160 Gas-Powered Pressure Washer with 25-Foot Hos Now

This is really good piece of equipment. The reason i am not given all the stars, is because I had some trouble installing the high pressure hose at the outlet. Other than that, easy to start, easy maintenance, and works really well.

Read Best Reviews of Campbell Hausfeld PW2575 2,500 psi 2.4 gpm Honda GCV160 Gas-Powered Pressure Washer with 25-Foot Hos Here

Primefit CM02006 Oil Lubricated Portable Air Compressor, 6-Gallon

• Oil-lubricated pump for longer life and quieter operation than traditional oil free units
• Ideal for use with Nailers, Blow guns, Tire Inflation tools, and other light air consumption tools
• Unit features a max pressure of 115PSI, and an air delivery of 3.5 CFM at 90 PSI, and 4.5 CFM at 40 PSI
• Portable compact design with 6-Gallon tank and wheels for easy storage and portability
• 1 Year Limited Warranty

My sister had me buy this for her husband who is in construction and does various side-jobs. Works great he loves it and the portability

Buy Primefit CM02006 Oil Lubricated Portable Air Compressor, 6-Gallon Now

This is a good air compressor for the price. The only problems I've found with it is that it'll have a hard time starting when it's in a cold environment and itll run my impact gun, but not really strong. But for the price you really won't find a better compressor.

Primefit ATK1000 Air Tool Kit with Impact, Ratchet, Chisel, Blow Gun, and other Accessories, 50-Piec

• Durable construction and reliable performance tools, ideal for any garage or workshop
• 1/2-Inch Impact features 250-Foot Pound of torque and power adjustment, ideal for tire changing and more
• 3/8-Inch ratchet features 90-Foot Pound of torque, ideal for hard to reach areas
• Also features an air chisel for removing stubborn bolts and metal cutting, a blow gun with various nozzle attachments
• Heavy duty storage case

I've never owned an air tool set before and only used one once previously. Since I do work on my vehicles some, and just recently needed to borrow an impact driver to change my front brake pads, I decided it was time I should have my own set. I shopped around, read lots of reviews and for the money, this set seemed like a good combination of quality and price. Delivery was very fast and the set does seem to be well built. Make no mistake, this is NOT a commercial grade product and is not marketed as such. The meager included documentation clearly states "For home and DIY use ONLY."

This brings me to my only complaint, tempered by praise for the manufacturer's outstanding customer support. When I opened the case, I found only three, very sparse "Operating" Manuals" which were virtually useless to someone without any previous air tool experience. All the manuals referred to an "Instruction Manual" which was not in the case, so I contacted the manufacturer to request the "missing" manual. To their credit, they responded within one day to let me know that there was no instruction manual but they would be happy to answer any questions I had about the product. I then proceeded to pepper them with numerous questions, to which they courteously and quickly responded. Within a couple days exchanging numerous emails, I had all my answers and am comfortable with proceeding to use my new set.

I was very impressed with Primefit's responsive customer support and they did say they are working on a general manual for the set, but could not provide a completion date.

Buy Primefit ATK1000 Air Tool Kit with Impact, Ratchet, Chisel, Blow Gun, and other Accessories, 50-Piec Now

I bought this for my son. He used it to replace an engine. He and his partner said the kit was great.

Read Best Reviews of Primefit ATK1000 Air Tool Kit with Impact, Ratchet, Chisel, Blow Gun, and other Accessories, 50-Piec Here

I was sorely disappointed with both the 1/2" wrench and the 3/8" wrench. Both were underpowered and I was forced to go back to my old impact wrench I was using to get the bolts off my Sienna. I immediately returned mine for a refund. I guess you get what you pay for.

Want Primefit ATK1000 Air Tool Kit with Impact, Ratchet, Chisel, Blow Gun, and other Accessories, 50-Piec Discount?

This item arrived with a broken clasp. Unfortunately it is very heavy and is a Christmas gift and will cost alot to send back. The product is very nice but looks like it was not packed properly and thrown around. I can order things all year round for myself and never have a problem with my product. But it seems the minute I order an expensive gift for my husband it looks terrible.

Save 55% Off

this package has good quality equipment made to stay for a long time. Almost everything you need to do around the house or at the wirkshop jobs. However, the most important tool is not included in the package. You guessed right, it's the drill which means a lot to people who like to act as handymen at home. The package will be more valuable and easy to understand if it came with video on a CD for illustration of how to use the included tools. Nevertheless the package is great for such price.

New 1/4" ASME Safety relief Valve 125 PSI American made

• 1/4" Safety Valve 119 SCFM - 125 PSI
• Free Shipping
• 51 mm Tall x 17.5 hex
• ASME Certified & stamped w/ UV & UB stamps

Nice Quality part--Made in the USA! Much better than cheap pop off valve that was on compressor from factory. What more can you say?!

Buy New 1/4" ASME Safety relief Valve 125 PSI American made Now

This is a very good, excellent made valve to keep pressure levels safe in air compressors. I also Liked the free shipping with this product.

Read Best Reviews of New 1/4" ASME Safety relief Valve 125 PSI American made Here

Had to replace a few things because this compressor is 20 years old. The replacement worked very well.

The main problem was the check valve leaking and causing the compressor to cycle every few hours so I replaced

a few things, this among them.

Factory-Reconditioned Porter-Cable 3PAKR Finish Nailer/Brad Nailer/Stapler Compressor Combo

• 150 psi max allows users to drive more nails than a traditional 135 max psi compressor
• 6 gal tank allows users to drive a large quantity of nails on a single tank charge
• 2.6 SCFM @ 90 psi allows for quick compressor recovery time, per ISO1217
• 10 Amps current draw allows use of compressor with a 16 ga. or heavier extension cord (50 feet or less)
• FN250C uses standard 16 ga. finish nails from 1" to 2-1/2" long

In my kit, the finishing nailer was refurbished, the rest new. It didn't work at all out of the box. It was so bad it almost surely didn't work when it left the repair center. Porter Cable (PC) would not take the unit back; I had to take it to a repair center which meant taking time off of work. When I picked it up, they said a part was missing, that they couldn't repair it, and that it could not have worked when it left the repair facility. I contacted PC again and they sent me a prepaid return mailing label and exchanged it for a new unit in retail packaging. In the end, PC did the right thing but I'm still annoyed that I had to invest three hours of my time to get it resolved.

Now that everything works, it seems to be of decent quality. the compressor is loud, but the largish tank and high pressure are very, very nice. Overall, if I had it to do over again, I'd probably go for the Bostich set for approximately the same price, but I'm happy with the set that I have.

Buy Factory-Reconditioned Porter-Cable 3PAKR Finish Nailer/Brad Nailer/Stapler Compressor Combo Now

I bought this last week because I am working on a 12ft high x 36ft long x 4ft deep childrens playhouse. There was no way I was hammer nailing all of the roof shingles, trim, etc... So I went on line and saw this package. Let me say that it is AWESOME! It looked brand new. There was no visual signs of any prior use. Other than "Inspected by 3-1" stickers on everything you would think it was brand new. I have used over 4000 Finish Nails, and over 2500 Finish nails since it arrived (I haven't used the stapler yet). It has performed flawlessly. I am so glad I got it. It is a great value!

Read Best Reviews of Factory-Reconditioned Porter-Cable 3PAKR Finish Nailer/Brad Nailer/Stapler Compressor Combo Here

The compressor was toast. Could not have been tested before shipping. My first and perhaps last refurb tool purchase.

Want Factory-Reconditioned Porter-Cable 3PAKR Finish Nailer/Brad Nailer/Stapler Compressor Combo Discount?

The guns in this kit are great, however I think PC should have stepped it up to the better brad nailer... Guns worked with zero problems, zero jams, zero misfires. Adjustable depth works very well.

Not a huge fan of the compressor, not just with this kit, but any combo kit. I wish they would take some of the better compressors and make them into a combo pack for a little more money. mainly because outside of a combo pack, the guns are pretty expensive. You're basically buying this combo for the guns and a starter compressor till you can buy a better one.

Item arrived in great working condition. It had some other guys last name etched into the bottom, but otherwise in pristine condition. Worked like a charm.

I saw the same kit at Home Depot for $289. So... This is a wonderful value.

Goodyear i5000 Cordless Tire Inflator and 12-Volt Power Pack

• High pressure 12 Volt portable inflator
• Inflates 14 inch vehicle tire from 0-28lbs of pressure in under 4 minutes
• Inflator operates in 2 different modes: Battery or Directly off vehicle current
• Charges off of AC household current or off 12 Volt vehicle Current, both power adaptors are included
• Built In 12 Volt power outlet to operate cellular telephones, invertors or other 12 Volt equipment

Received the pump when promissed, so far it has worked as advertised. I really like the auto shut off when the tire pressure reaches your selected pressure. Some advice, if you set the pressure for 32 pounds of pressure and the tire pressure is already at 32 psi or HIGHER the pump will not start, it only starts when the tire pressure is BELOW what you set psi for. I have already used it for the kids soccor balls, my vehicle tires (Ford F150) and my travel trailer tires, with air pumps that need to be plugged in the a power source, this would not work on my travel trailer because the standard 10 foot power cord would be too short for me to reach the trailer tires!. It also came in handy when having to winterize my travel trailer by pressurizing the water lines to blow out the water from the lines. Also, a great price for the convenience of not needing to plug it in to an outlet or cigarette lighter!

Buy Goodyear i5000 Cordless Tire Inflator and 12-Volt Power Pack Now

Very good machine, works like a champ. Wish it would tell me when it's full, rather than NOT starting on a tire that is already at full charge. It took me a while to realize this "feature". Great to be wireless!

Read Best Reviews of Goodyear i5000 Cordless Tire Inflator and 12-Volt Power Pack Here

I bought this for my husband as a gift. We have a camper and he wanted something that we could take with us when we travel that doesn't need electricity. The first one we received did not work (worked for about 3 minutes, then quit), but they quickly sent me a replacement and it works great! His father also has this pump, has had it for several years and is quite happy with it!

Want Goodyear i5000 Cordless Tire Inflator and 12-Volt Power Pack Discount?

Be aware that you must cool the unit for 10 minutes after running it for 10 minutes so it doesn't burn out. I added about 4 psi to my vehicle tires and it ran for less than a minute per tire. It runs quiet for an inflator. The built-in lighted dial guage is very accurate, but kind of hard to read because the marks are small and close together.

Setting the target pressure is easy, you just twist the guage until a pointer lines up with the psi you want. The inflator automatically shuts off at that pressure and it is accurate and consistent. No switching back and forth between filling and checking with a separate tire guage and bleeding air to hit the target pressure. The setting stays until you move it again, so you can bring all your tires to the same pressure without re-setting it for each tire. No fuss like with a digital one. Super convenient.

I recommend charging the battery immediately after use and keeping it fully charged at all times. The lead acid battery will have the longest lifetime that way. Once the battery gives out, the only way to run it is directly powered from a 12V vehicle outlet.

The manual and the labelling of switches and sockets is a little confusing, but operation is not overly complicated. There are two switches and two power ports. You'll figure it out.

You could burn it out with a big job like completely filling an RV tire, raft, air tank, etc. unless you stop every 10 minutes. As long as you stay within the limits, this will be a good tool. Probably the most convenient way to maintain vehicle tire pressures.

Works great. This item has a way of pre-selecting the amount of tire pressure and you let it run until the tire is properly inflated. Good buy.

Interstate Pneumatics LF10-4H Pressure Switch - 1/4 FPT Four Port - Bend Lever Swicth

• 6.3 mm unloader valve connection
• 1/4 npt female connection
• Cut off pressure 85-125 PSI
• Amperage Rating 20 Amps
• Four ports

I have a Central Pneumatics 4 HP 10 gallon compressor from Harbor Freight. This is a close replacement. I involves changing the copper line to the tank but the lever action is less prone to problems as the button switch that come on the compressors. You need access to a flaring tool and less than a foot of 1/4" copper line. The actual switch must be made by the same company as it is identical. I happy with the upgrade.

Buy Interstate Pneumatics LF10-4H Pressure Switch - 1/4 FPT Four Port - Bend Lever Swicth Now

I broke a fitting off in the original switch on my air compressor, so I ordered this one as a replacement. It installed easy enought and the compressor is working fine again. I am very pleased and with Summer coming with bike tires, balls, and water toys. Oh, and the tires on our vehicles might need some air too.

The switch worked fine just as I needes.

Read Best Reviews of Interstate Pneumatics LF10-4H Pressure Switch - 1/4 FPT Four Port - Bend Lever Swicth Here

The product is ok, but i am very desapointly for the shipping,ToolBit ship a the wrong address,Fedex lost the parcel,we found the parcel after 14 days...................

regards

Louise Monnière

p/s English is not my regular language but i do my best

Want Interstate Pneumatics LF10-4H Pressure Switch - 1/4 FPT Four Port - Bend Lever Swicth Discount?

Switch works great. Time will tell how long it lasts, but it appeares to be as well made as the OEM switches on compressors from the big box stores. Having the on/off switch is nice to have. I don't have to unplug my compressor when not using.

The Source CLS-200 Heavy Duty Roll BAR Clamps for 2" Roll Bars for The Source High Performance Porta

• Extra Secure
• Fits 2" Roll Bars
• Extra Heavy Duty
• Comes in Black
• Fits Vehicle Mount Bracket

I like the clamps, but really wish you could still purchase the CLS-175 for 1 3/4" roll bars. The CLS-200 does fit my 1 3/4" chase rack tubing, but only because it is coated with Line-X. I don't think my tank is going anywhere with these clamps in place!