Stanley Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer

• 1/2-inch to 1-3/16-inch 23-gauge pin nailer; low-profile nose-piece tapers for clear site
• Adjustable high/lower power switch for depth control and longer life
• Lightweight and durable aluminum housing
• Includes nailer, oil, abrasive, and kit box
• 7.81 by 9.06 by 1.6 inches; 2.3 pounds; 7-year limited warranty

Yes , there is a problem with driving 1 3/16" pins but Bostitch will send you an easy fix, a new driver/piston. I am surprised that no one called them and posted this . I always contact the manufacturer with any issues first, some are very helpful and others are not. Great CS from them, as I always have had from them, and an other wise very well made compact driver now will work just fine. As far as using 2"pins, they are too long for this gauge in real wood[18 ga.2"brads is even pushing it] ;they bend easily and can "blowout" of the wood[follow the grain] when using to be really useful anyway but the 1 3/16" is perfect for shoe base mld. for flooring installs and no filler is really needed. 1" pin guns limits the usefulness as other brands have as their longest length. 4 stars for the tool as is, and add 1 star for Bostitch being there to fix their problem making the gun excellent now.

Buy Stanley Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer Now

Just returned mine and ordered a Grex 635 instead. I fired about 40 pins in hard and soft wood, tried various compressor pressure settings, and various settings of the so-called "depth control." The gun jammed once. If the air pressure is at the low end of the recommended range (70-100 lbs.), or if the so-called "depth control" is set low, pins will usually be proud of the surface. With the proper adjustments the best you can do is get them to be flush, which is unacceptable as far as I'm concerned. According to Bostitch Customer Service, this pin nailer is not designed to countersink pins, but rather to leave them flush with the service. The "depth control" is a misleading name for what is really just another way of adjusting air pressure. It does NOT change the travel distance of the pin.

Read Best Reviews of Stanley Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer Here

shot up many a clip of pins over the past week on a kitchen with cherry cabinets and trim. guns of this ilk are absolutely invaluable in delicate/intricate hardwood production work, from temporary jigging to glue up clamping to achieving the perfect miter. but this gun drove me up the wall and forced the guy coming behind me with the markers and putty to take his artistry to a new level. almost every pin stood proud, long grain shots and end grain. if it wasn't proud there was the slightest dent from the gun nose and the pin was still didn't countersink. when trimming in standard fjp this gun is a godsend, but for hardwood work you had better invest in a microscopic nailset(alien technology, coming soon) if bostitch hasn't decided to include one in the case already

...to follow up, this pinner is but a continuing let down. production installation of hardwood is the name, having the pin hold the pieces is but half the game. the many, the proud. i have a quick learning curve, now i've got a grex.

Want Stanley Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer Discount?

I just received this nailer about a week ago and have put it to work everyday. The first time I used it I noticed it would only drive the pins flush which makes the tool useless. The pins wouldn't even countersink in pine. I decided to grind the tip down a little hoping that it would allow the driver to make the pin go well below the wood. I'm sure Stanley wouldn't recommend this, but it did the job and now my pins go just the right depth in any wood that I use it on. Besides this minor problem everything else is perfect with tool including the case.

Save 40% Off

I was excited to purchase this nailer based on its ability to drive pins in excess of 1 inch. When it arrived I was pleased with the construction of the unit, very well made in the true Bostitch tradition. Upon immediately firing up my compressor to see what the unit will do, I was disappointed to see that it had a problem driving the 1 3/16 inch pins all the way into hardwood, in this case red oak. I tried different settings and even with the PSI set to max the pins would not countersink. I had to use a nail punch to finish the job, which is counter intuitive to why you would use a pin nailer to begin with. Other than that the nailer performs flawlessly, never jamming, etc. And by the way, the 1 3/6 pins are tough to come by. I have not seen them in any of my local home improvement or hardware stores. They are available through Amazon however, so you can stock up there.

PneumaticPlus SAR4000T-N04BG Air Pressure Regulator T-Handle 1/2" NPT with Gauge & Bracket

• Includes 0-150 PSI Pressure Gauge & Bracket
• For Use with Compressors, Spray Guns & Other Air tools
• Operating Temperature: -30 F to 175 F - 40 Micron Element Stanard
• Manufacturerd In Korea

I needed a t-handle regulator, with gauge for my garage compressor, and new air lines that I installed. This worked perfectly, and is very well built. Nothing like the cheap units you'd find ON the compressor itself. Cost of this unit also was very good, in comparison to some of them I see listed.

AO Smith CP1152L Air Compressor Motor 1-1/2 HP

perfect fit. powerfull and easy to install. very good quality . will always use this manufacture.. deliverd on time and had very good instructions with it...it is much quiter than the one tha was installed..

2-IN-1 HVLP AIR SPRAYER AND PRIMER GUN WITH REGULATOR 1.4MM + 2.0MM NOZZLES

• EXCELLENT PERFORMANCE AND EASY TO CLEAN

To say this gun is a piece of junk is giving it too much credit. The spray nozzle is frozen or does not come off the gun which makes the extra nozzle kit useless. To be precise this gun is a cheap imitation of a piece of junk. Save your money because its not worth the postage to return which is what they depend on to sell crap like this.

Buy 2-IN-1 HVLP AIR SPRAYER AND PRIMER GUN WITH REGULATOR 1.4MM + 2.0MM NOZZLES Now

The price is right. stay with the breakdown instructions, as you clean up, to keep the order of reassembly.

Be sure to have the drain plugged in the wash basin, to keep the small parts.

Only would have liked more thorough guidance on how to adjust for solid stain spraying and polyurethane spraying.

Once I found the sweet spot and had it tuned right , I sprayed an entire 14' X 12' deck with rails in 35 minutes.

Need to buy a water filter approx $5. Four to four and one half stars!

Read Best Reviews of 2-IN-1 HVLP AIR SPRAYER AND PRIMER GUN WITH REGULATOR 1.4MM + 2.0MM NOZZLES Here

I got this little set a few day's ago and just now put it to use.And man oohhh man this thing work's as good as one you pay through the nose for,this set is well worth every penny you will pay for it.It put down a finish like you would get form a high dollar one would, if you ask me go ahead and get you one you want regert it. 2 in 1 hvlp air sprayer & primer gun with reg. 1.4mm & 2.0mm nozzle's.

Maxair C5160V1-MAP 60-Gallon 170 PSI Max Electric Stationary Compressor

• 5HP electric motor
• Extended drain at base
• 18.5 CFM at 100 PSI
• 60-gallon vertical tank
• Heavy duty belt guard; high performance

I had a similar sized Puma which lasted for about 16 years, but needed repairs occasionally and eventually wound up developing a crack in the top of the tank. This one has higher pressure and more CFMs, and a much heavier duty pressure switch. I had to replace the undersized pressure switch on my Puma twice. The motor is huge and looks about 50% bigger than the one on my Puma. The compressor runs a little quieter and seems to run a lot cooler. It seems really solidly built and well thought out. The tank has a higher pressure rating. It has a really convenient extended drain valve that's easy to reach right at the lower front of the tank, rather than underneath the tank. It has cast iron cylinders, three separate air filters, copper finned copper tubes where the compressor feeds into the tank to help cool down the air before it gets into the tank, and a big fan/flywheel. The oil level site glass on the pump is easy to see, and the oil fill is in a convenient location. It has a nice large liquid filled pressure gauge that holds steady and is located for easy visibility. The pressure switch is on the side, where it's easier to get to and easier to wire up. The air coming out of it is nice and dry, with no oil blow-by from the compressor. I wanted something that will be really reliable and put out enough pressure to run all of the tools I use. The old Puma was almost good enough, but I think this one will be perfect.

I use this fairly often for, painting, bead blasting, air tools, cutting tools, plasma cutter, etc. Works like a champ so far, and I'm really happy with it. Would definitely recommend it to anyone who wants to pay a little more for a good quality compressor.

One more thing I like about it is the three feet it has instead of four like some other brands. The feet have slotted holes, so your holes can be slightly off in alignment from the holes you drill in the concrete and it will still work. I think you definitely want to bolt it down. It's very top heavy and needs to be bolted securely to the ground. I have mine on a 6" thick slab with a little home-made wood shed around it which I located out behind my garage. I used three 3/8" "drop in anchors" to bolt it down, but you could probably use 1/2" too if you wanted to.

Solid Brass 1/4" Female Thread Air Hose Quick Connect Plug

• Professional choice for frequent air supply connect/disconnect, reduced hose & tool wear-&-tear
• Female-threaded 1/4" NPT plug for use with quick connect air couplers
• Solid brass, 1-7/16" length, 1/4" barrel length above lip, 5/8" hex hut; .6 oz each
• Fits most air quick couplers
• Sold individually - order in any quantity and save on shipping cost

NICE SERVICES...:)

i HOPE TO PAY FROM YOU NEXT TIME...:)

THE BRICE IS GOOD ALSO...:)

THNAXXXX MAN FOR YOUR SERVICES...:)

Buy Solid Brass 1/4" Female Thread Air Hose Quick Connect Plug Now

These are lacking in descriptive language, they have a shorter barrel and will not fit industrial or M type quick connect fittings. Not sure just what they are intended for...

Read Best Reviews of Solid Brass 1/4" Female Thread Air Hose Quick Connect Plug Here

There isn't much mention of size or exact fitting type in the description.

This one is too short to fit into a standard industrial type quick connect.

The only thing I could get it to fit into is the connect on my Makita MAC700 compressor, I'm not sure what type it is, but it fits everything I have.

Anyway this didn't work with the 4 or so different types of Industrial NPT quick connects that I bought on amazon and at home depot.

Want Solid Brass 1/4" Female Thread Air Hose Quick Connect Plug Discount?

Item came in as ordered --very good quality--Amazon does a very good job.I am a loyal customer and hope to continue

Interstate Pneumatics SA9M 4 Inch Diameter -1/2 Inch MPT Metal Body Compressor Air Intake Filter wit

• Greater durability than other filters in the market
• Designed for use with most of the brand compressors
• Filtration Efficiency Over 99%

It was a good price but it needed work to function. The filter is not tall enough to seal in the housing. When the cover is installed and tightened it hangs up on the inlet tube on one side. to let the cover sit flat and seal on the filter I had to cut a notch in the cover.

GoodYear 045 3/8-Inch-by-50-Feet Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inc

• Made of heavy-duty reinforced rubber for durability
• Equipped with an oil- and abrasion-resistant tube
• Hose measures 3/8 inch by 50 feet
• Includes ferrules and fittings
• Made in the U.S.A.

The advantage to this Goodyear hose is that it is made out of industrial grade rubber instead of vinyl. What that means is that when you are using it instead of being stiff like vinyl it remains soft and flexible, so it lays flat on the floor. This is especially a problem in colder temperatures. It's great for coiling as well, it doesn't fight you.

The real frustration of using a vinyl hose is that it can stand up while moving across the floor, high enough to snag on things, or even pull something onto the floor. The hose is in a coil, then instead of simply uncoiling, the vinyl has a memory and wants to look more like hoops moving over the floor.

This hose comes in 3/8" which is the most popular size. The 1/4" hoses restrict air flow, which is especially important over a 50 foot run.

All in all highly recommended. The advantages are worth it even if it was twice the price.

Buy GoodYear 045 3/8-Inch-by-50-Feet Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inc Now

Having used just about every type of air hose on the market, I can say the yellow Goodyear hose is second to none. It is very durable and stands up to the wear and tear of jobsite use. The coupler ends maintain excellent wear and far outlast other less durable hoses.

Read Best Reviews of GoodYear 045 3/8-Inch-by-50-Feet Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inc Here

I bought this air hose under the impression it was a genuine goodyear air hose. It's not; it's a knockoff. The hose may or may not work fine, but it's not a goodyear hose. This is a genuine goodyear air hose. This was confirmed by the manufacturer of the real hoses; see hobbler's 1 star review and check the comments.

I didn't suspect much until I got the hose and noticed a couple of things. Though it seems to be hit or miss, the fittings on mine were mis-threaded as well. I tried to attach this hose to a hose reel and the fitting was very difficult to thread and only went on a few turns before not being able to go any further, even with a wrench. Also, the hose itself did NOT have the Mit diamond trademark signifying a genuine goodyear hose, and the goodyear markings that are there were put on sloppily and were starting to rub off.

Like I said, the hose may or may not work fine; I couldn't get mine threaded to even try it so 1 star. Others seem happy with it, and that's great, but I don't like to be duped. Don't sell me a harbor freight hose at goodyear prices. The genuine goodyear hose is only eight bucks more so I bought one of those and this one is en router back to amazon for a refund.

Amazon needs to get on the ball with these counterfeit items. I had a similar experience with a belkin USB cable, where it was supposed to be belkin, yet the cable was absolute garbage, extremely generic and anorexicly thin.

Want GoodYear 045 3/8-Inch-by-50-Feet Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inc Discount?

A cheap airhose (made from PVC, usually) is a pain. They stay coiled when you uncoil them, and stay straight when you coil them. A high quality rubber hose makes a huge difference. It sounds trivial, but it really makes managing hoses easier. When I'm in the shop, or out on a job I want to be able to run the hose out quickly, and coil it neatly when I'm done. A high quality rubber hose like this one makes it easy.

My Goodyear hoses have been in service for a long time and are tough enough to last for many more years.

I also appriaciate the fact that it's made in the USA.

One extra tip lay out your hose, then connect it to the tank. If you connect it to the tank when it's coiled, it'll fill with air and be harder to uncoil.

Save 72% Off

I recently puchased one of these 50' hoses for my new DeWalt twin tank air compressor. This is by far the best 50' hose on the market today without question. It remains totally flexible in cold temperatures unlike those vinyl coiled hoses on the market. It also lays flat when in use and does not coil up in places. You don't have to worry about tripping over this hose. The couplings at each end of the hose are very high quality and the yellow color is very noticeable to keep others from snagging the hose and tripping on it. The 50' lenght is perfect to allow you to move about freely and not relocate your compressor often. This is a great product and the price is right. Get one of these. You will be glad you did.

Sharpe 6760 DryAire Dessicant Air Filter System

• System maintains a -40deg F dew point while achieving 0% compressed air humidity
• Coalescer that removes oil and sub-micron particles down to .01 microns
• Provides maximum filtration capacity of 30 CFM @ 175 PSI
• Silica gel provides maximum moisture absorption with easy desiccant changeout
• Dessicant can be regenerated or replaced

This product shipped in a beautiful styro molded box. Arrived in great shape. It's mounted on the wall, hooked up, and keeps the air and oil from the air supply going to my equipment as advertised. The one thing that I wish they did differently is the bracket that holds this to the wall is a little flimsy. The three canisters with all the fittings are a little heavy for the tiny bracket around the center canister. I had to add an additional strap support twixt the large right canister and the regulator to keep it from listing to starboard.

Also, it would be nice to have a filter wrench thrown in so you can access the contents when necessary.

Other than these little nags the product is sturdy, well built and I expect to get years of use from it.

Buy Sharpe 6760 DryAire Dessicant Air Filter System Now

I needed this for application of a special firearm finish. It was recommended to me by my local paint supply store, who also uses it, and I got it here for a lot less than $700 they were asking at the shop. 3-stage filter, cleans /very/ easily. All it takes is some elbow grease to unscrew the canisters and give them a quick shake and a drying out once a week or so. Extremely user friendly.

The added regulator on the end has two 1/4" NPT outlets that are great for hooking up extra hoseI run one to my paint gun and one to my sandblasting cabinet. The screw-valve is a pain to back in and out, but you can control pressure nearly to the pound, up from 5 to 120 PSI. I've run it for two months now without so much as a hiccough.

Don't use this by itselfyou still need a good 15' of iron pipe to let the air cool and condense. If you try and run this straight from your compressor, especially for extended periods, you'll have to empty out the big canister and de-hydrate your dessicant beads. Which, again, not terribly difficult, but you might as well prolong their life as much as possible.

I would buy this again, without hesitation. It's definitely worth the extra money to make sure you've got the right equipment for the job. Scrimping and getting one of the cheaper single-stage ones will end up costing you more in the long run due to water and oil content in your end product.

Read Best Reviews of Sharpe 6760 DryAire Dessicant Air Filter System Here

came as expected. Shipped to Canada and through customs in less than a week.

Want Sharpe 6760 DryAire Dessicant Air Filter System Discount?

I like it. Seems to filter out everything, I'm new to painting so I can't really say too much. But seems like the air is very clean coming out of it.

Save 26% Off

The item is exactly want I expected, and better yet the delivery was fast, almost as fast as the email confirmation. Thanks!

Ingersoll-Rand 231-TK2 Tune-Up Kit

• 1/2" Impact Wrench Tune-Up kit for use with Ingersoll Rand 231C, 231HA and 231HA-2 Impact Wrenches.

If you look at the picture you are lead to believe it comes with the bearings.IT DOES NOT ! other than that it is complete enough to rebuild the product just dont expect the bearings.

Buy Ingersoll-Rand 231-TK2 Tune-Up Kit Now

My gun was always the strongest in the shop for about 25 years and then it started to die slowly. I rebuilt it with this kit and now for the last three years it has once again risen to being the top performer in the shop used daily.

Read Best Reviews of Ingersoll-Rand 231-TK2 Tune-Up Kit Here

It worked but it is not like the picture. You do not get all the pieces shown in the add. So make sure that this is what you what you want.

Want Ingersoll-Rand 231-TK2 Tune-Up Kit Discount?

have an old ir that was very week that i got on trade and rebuilt it but still not that powerful. it got better but still not that powerful. so in the end i bought a new one as im an auto mechanic and love the brand. but at a certain point just get a new one. there very good when new. my old one was just too worn out.

Ingersoll-Rand 2115TI 3/8-Inch Titanium Duty Mini Air Impact Wrench

• 280 ft.-lbs. maximum torque
• 15,000 rpm
• Weights just 2.4 lbs.
• Titanium Strength

Very powerful for a 3/8 drive gun. So far no problems and dont see any inthe future. Alot of guys in my shop use these and they say that they have never had a any problems. This is the best price I have seen anywhere. Stop looking By it here.

Buy Ingersoll-Rand 2115TI 3/8-Inch Titanium Duty Mini Air Impact Wrench Now

I've had this impact for almost 8 years now. It still works as if it were new!

Over the years I've had to replace the trigger mechanism and directional buttons but that's about it. $20 or so in parts and this gun is still running strong.

My only complaint is that my anvil is starting to wear out and barely holds on to sockets anymore. I guess that's what happens when you use a 3/8" impact to do the job of a 1/2".

Read Best Reviews of Ingersoll-Rand 2115TI 3/8-Inch Titanium Duty Mini Air Impact Wrench Here

I'll stick with a snap on 3/8 next purchase because this wrench is too fast. I still give it a 5. If you have the need for speed, go for it. But I warned you1

Want Ingersoll-Rand 2115TI 3/8-Inch Titanium Duty Mini Air Impact Wrench Discount?

IR product has lighter weight & better torque than any other products. Amazon has the best shipping deal and super fast too. All i'd like to comment is the right choice that i've ever made !

I have had this for a year now and it has not missed a beat. It is light weight, fast, and powerful. I use it everyday at work. I would by another (if this ever failed) in a minute.

Campbell Hausfeld WS0990 115-Volt Stick Welder

• Great for small repairs and hobby welding
• Runs on standard 115V power
• Dual heat setting and thermal overload protection
• Versatile design welds mild and stainless steel from 18 ga. To 1/8 in.
• Durable metal welder with comfort fit handle

Naively, I purchased this product based on the price and the raving reviews it was getting. The "specifications" leave a lot to be desired. One review even says this product welds ¼" with no problem. I thought "what the heck" since it was only $106. Well let me tell you, this won't weld ¼", it won't even weld 1/8". I rated it a 3 because I did not test lighter gauge metals since that is not my need. It might work great on those, I just don't know. This review is basically for the misleading reviews Amazon has for this product.

Buy Campbell Hausfeld WS0990 115-Volt Stick Welder Now

being in home repair all my life i had never needed to weld until now. it was absolutely the best price i could find. it arrived a day before they said it would, ready to use right out of the box. it is simple to operate and pretty foolproof. i taught myself to use it in 5 minutes from the included instructions and have used it on many jobs since then including a few art projects just for fun. the ONLY problem was the mask is handheld. i only have two hands.

Read Best Reviews of Campbell Hausfeld WS0990 115-Volt Stick Welder Here

I bought this little welder to put together a set of custom built pedals for a home made racing cockpit. It did the job of tacking my pieces together!

Want Campbell Hausfeld WS0990 115-Volt Stick Welder Discount?

I didn't have expectations that this was going to be the most awesome welder I ever owned. I didn't plan to build giant robots and take over the world. I did however expect that it would be able to make an arc. It failed to do that.

When you flip the power switch you can hear it "Clunk" letting you know there is some juice, but there is no "on" light so if you wander off and leave it no one will know.

Clamp the lead to my piece of thin steel tubing, touch the stick to the joint. Nothing. Sand the spot where I am clamping too. Reclamp. Nothing.

Maybe my steel is not conductive enough. Grab some sheet steel clamp to that, just touch the stick to it to see that I get a spark. Nothing.

Swap sticks. Nothing.

I wouldn't recommend this to anyone. It sucks. It is Sunday so I don't know if i can return it. That won't change my rating but will make me less annoyed.

Save 31% Off

First the included stick are not for a new to welding person. I knew that so i was prepared, Find some E6013 rods and this welder just works. i found 1/16 worked great on low. and high was a waste. No popped breakers on low or high, i have 20 amp circuits.

Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner

• Powerful motor penetrates fasteners through the hardest materials
• Shoots fasteners up to 1-3/8-inch length easily, even-inch hardwoods
• Patented design eliminates need to adjust for different fastener lengths
• Double trigger safety prevents accidental firing of tool
• Narrow nose reaches tight areas and corners for detailed trim work

I am simply amazed by this pinner. I have used many others with less features and the Grex p635 is a hands down winner. Few manufacturers offer a 23ga pinner as versatile as the P635 with the capability to shoot 3/8 to 1 3/8 pins and self adjusting to boot. No splitting of crown or delicate hardwood mouldings even within 1/8" of an end mitre. I have pretty much retired my 18ga brad nailer for high end trim in leu of the Grex P635. I am impressed with the holding power of the 23 ga pins in hardwood crown on cabinet installs. As a professional wood worker I highly recommend this pinner.

Buy Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner Now

I was introduced to this nail gun at my last job. Now that I am in business for myself, I had to get one. I have used the Senco and the Grex 23g micro pinners. The Sencos that we had at the shop hardly ever worked properly. They weren't self-adjusting, so changing nail lengths was a pain. And, the nail heads almost always stayed above the surface of the material. The Grex, however is self adjusting, and goes all the way from 1/4" to 1 3/8" nail lengths. Even in the hardest wood it always sinks the heads. The only time it hasn't was when I was shooting into maple at a harsh angle, or when the compressor didn't come back on and there wasn't enough pressure. Also, I have had the gun for 2 months and used it almost every work day since then, and I have only had one minor jam. Plus, just the fact that you don't have to fill every nail hole with putty makes this tool a life saver.

Read Best Reviews of Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner Here

I purchased Senco, Porta-Cable, Bostitch, Omer, and Grex. Grex by far is the best! It doesn't jam, or break down. Very reliable and saves me money over the long run from not repairing it every week. Before the P635 my porta-cable and omer both gave me the biggest problems. The Grex gets into the corners and doesn't leave a mark into the finished product. I have owned them for 2 years and now getting one for my father. Also, I have been burned by the big auction web site(won't name names)trying to buy this tool.

Want Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner Discount?

(see revision below) I wasn't led astray by others who raved about this 23 gauge pinner. It saved the day as far as doing an intricate exterior Ipe handrail with polyurethane glue. No other brad or nailer would work except my old Senco 1/2 thru 3/4 inch pinner and it leaked and didn't have the power of this new one. With no time to use small screws and countersinks nor tenoning, I found that using toe nailed 23 guage pins with polyurethane glue really held together this hard-as-nails exterior hardwood.

The only small problem was when adding a new shank of pins to a nearly empty gun.. that when the previous shank was used up the new shank due to the smallest misalignment wouldn't pin.. .not a biggy..It just meant one had to very carefully load the pinner and make sure the same size of pins was in-line with the prior shank of pins. Very hard to tell if the gun is firing or not. But minor concerns with such a Great Tool! It's very powerful judging at the strength of penetration into a wood (Ipe) that is very close to being the hardest of woods. 18 guage would shatter and split the wood and only my battery actuated Dewalt 16 guage gun would consistantly penetrate but only at a right angle and with occasional splitting. Only 23 guage pins would toe nail w/o bouncing off.

Someone described this as the "Lexus of pinners". Seems very true. Also the extra finger safety 'flipper' was annoying and my helper just taped it to the handle as we found that it was more likely to accidently fire with the intricacy of manipulating the safety on than having it taped off (down). Works now very well. No hitches. Comes with the usual leaky bottle of oil..but not even one pin in the box. Make sure you order some if you don't have 'em when ordering this gun.

after a month or so...revised review. Now the Grex no longer shoots pin to the surface...pins are proud a good 1/16. Opened it up and the first part of the pin driver is shattered. Thus needing a new piston pin, Amazon does carry it. But was the wood too hard (Ipe) on the pinner or is it just a bad design? Remember my old Senco still shoots pins but only is a half through three quarter pinner. I'd have to demote Grex to two stars. The pin driver seems only meant for softer woods. Need to find paperwork as no local dealer sells Grex or contact manufacturer.

Save 28% Off

After asking around on woodnet i found that this one is the only one that does not leave a small dent from the driving pin( at least in this price range)

the one drawback to all of these micro pinners is that you cant control the depth of the pin

it will never go more than about a 32nd into the wood

not quite enough for filler

Forney 75529 Blow Gun Kit, Deluxe Air

• All-purpose deluxe blow gun kit with four interchangeable nozzles for cleaning and deflating
• Complete with standard nozzle, rubber tip nozzle, tapered nozzle and ball inflator
• Perfect for blowing sawdust and grass clippings, drying surfaces or inflating balls, rafts and air mattresses
• All nozzles are packaged in a handy storage case
• For use on a regulated air line with a pressure setting not to exceed 30 PSI

This blow gun kit was just what I hoped it would be a Great Kit; very High Quality; and has a very good selection of tips. As I am using it for an indoor application the slightly smaller handle is also a plus !!!

Buy Forney 75529 Blow Gun Kit, Deluxe Air Now

A decent set of air gun/fittings for a decent price.

Works well and you gotta love the hanger hook on the back side ... classic.

Winterize RV, Motorhome, Camper, and Travel Trailer Blow Out Adapter: Air Compressor to Male Garden

• Adaptor with valve to winterize your RV, motorhome, camper, and travel trailer
• Pre-assembled length: 11 inches approx. Pressure rating: 250 psi with 4:1 safety factor
• 100% outdoor rated, virtually indestructible, impervious to water and oil
• All metal parts are brass. Hose is 3/8" ID Goodyear Insta-Grip. Assembled in Andover, Kansas, USA.
• SUPER FAST SHIPPING! ALL ORDERS ARE SHIPPED BY USPS WITHIN 24 HOURS.

I could have gotten by with the short, simple, cheap attachments but am glad I bought this. It is handy to be able to turn the valve on and off while adjusting and changing things around in the winterizing process. I did not need the extra length of the hose but like that it takes the stress off of the city water connection on my trailer. The short attachments would place direct vertical weight from the heavy duty compressor hose on the trailer connection.

It is well made.

Buy Winterize RV, Motorhome, Camper, and Travel Trailer Blow Out Adapter: Air Compressor to Male Garden Now

With this you can leave the air compressor on and connect it to the city water inlet and then go around opening all the faucets etc inside to tell when all the water is out.

I like it because the wife doessn't have the patience to do one of these jobs so it comes down to a one person job. That is me!

Read Best Reviews of Winterize RV, Motorhome, Camper, and Travel Trailer Blow Out Adapter: Air Compressor to Male Garden Here

I have used this to blow out pressure washers/hoses etc for the winter, and to winterize the motorhome. It works really well especially because it has a built in valve, so you can crank your compressor up, and just open the valve as much as needed. Seems really well made with quality parts. Built in Quick connect makes it especially easy to use with your compressor.

Want Winterize RV, Motorhome, Camper, and Travel Trailer Blow Out Adapter: Air Compressor to Male Garden Discount?

I would recomend to anyone needing to get water out of their lines on a camper. Works great, love it!

I got this for our RV this year and it really did help when we had to blow the water out of the lines for winterizing. My husband it saved alot of time and trouble and he could do it himself instead of needing someone else to be there.

Makita 5007MG Magnesium 7-1/4-Inch Circular Saw

• Quick change from 0 to 45 degrees and back using positive stops that are connected to easy-to-grip-levers
• Easy-to-read number and ruler markings on base and depth guide allow user to measure and follow cuts accurately
• Reinforced power cord withstands jobsite abuse
• Easy one-handed adjustments using large, rubberized levers
• 1 year warranty

I bought this saw about a month ago and I love that it is so light compared to the Milwaukee saws. I am normally a Milwaukee guy , but I wanted to try a different brand so I took a chance on Makita. I own a lot of Makita tools just not there saws . I am a carpenter and I need stuff to last because it gets used every day for 8+ hours. After I used the saw I love the balance and weight I also think the LED work light is a nice thing to have in low light conditions. All around I would recommend to all people that need a saw that is built to last!!!

Buy Makita 5007MG Magnesium 7-1/4-Inch Circular Saw Now

This is the best circular saw I have ever used. I used to own the previous version, 5007FK. I'm a homeowner, not a pro, and my old saw 'disappeared' when some contractors were at the house. I went for this upgraded model as a replacement and haven't been disappointed. I've used it on multiple projects (deck, bookcases, some light framing) and it is powerful and cuts true. It is a big improvement over the old version in several ways. The ergonomics are better, the adjustment levers are now rubber coated (used to be smaller hard plastic knobs), and the cast magnesium base is more solid than the old stamped aluminum base. Also, the blade guard is redesigned and no longer binds up on 2x material. Great saw. Highly recommended. Comparison shop against the Milwaukee and the Porter-Cable (forget the DeWalts) and you'll see this Makita comes in first. My only complaint is that the included blade is junk mine lost two carbide teeth on my first project. Ditch the blade for a good Irwin or DeWalt blade.

Read Best Reviews of Makita 5007MG Magnesium 7-1/4-Inch Circular Saw Here

I have used the current models of Dewalt, Hitachi and Milwaukee circular saws extensively, and this saw is hands down better than any of those. I use the saw every day,I have had this opportunity because my tools have been stolen a couple times(ouch)

The makita LXT impact and drill are so good that I thought I would try out this tool.

A list of what I noticed about this saw the first time I used it. I was astonished how quickly I noticed this stuff in use,

it seemed only all right when I checked it out at the store.

1. It has a silky smooth start up

2. It has excellent ergonomic grips

3. It is quieter and sounds better

4. It has an light to see your line, (much more useful than I thought it would be)

5. The adjustment levers function better and are easier to grab

6. Onboard storage for blade removal hex key

7. The angle adjustments and depth stop are easier to see.

8. It comes with the rip guide (much more useful that you would think)

9. The cord is installed to the body of the tool like they mean for it to stay and not fray

10. and does it ever cut smoothly,

it does not however have a electric brake, the 5007mga does though i believe.

This saw is on a different plane,

Thanks Makita engineers, you are making some amazing tools right now.

And other guys, come on seriously catch up.

Want Makita 5007MG Magnesium 7-1/4-Inch Circular Saw Discount?

I have used nothing but the base model makitas and have loved them. I was in the market for a new saw and thought this would be the top of all circular saws. It is great for bevels, very easy to set an accurate angle. Depth adjustment is a snap. Always having the wrench on the saw is a big plus.

The only problem that I have is the guard. I don't know if all the saws have this problem but my guard is always giving me problems. It just doesn't want to ride up as I make a cut.

As a precision-oriented professional home-remodeler, I finally got fed-up with the DeWalt 364 I had been using for the past 14 years. It is a rugged saw, to be sure, but I could never get it aligned properly, so ripping with the fence has always been an adventure. I finally gave up and just started ripping everything free-hand. Also, the blade would deflect terribly when ripping along a bevel. ANYWAY, I bought this Makita 5007MG and LOVE the saw. It's lighter, very well-balanced for me, and cuts incredibly accurately. The rubber grips everywhere are appreciated. The bevel lever and pre-set stops are great. Even the depth-of-cut guide is quite accurate. The led lights are a great bonus and are very effective even in total darkness. Oddly, they are on whenever the saw is plugged in, though led's do have a very long life, so this may be of little concern. All in all this saw is a pleasure to use, particularly for me as a left-hander--very easy to see the line-of-cut. I'm not sure why the complaint from another lefty in another review.

Where this package falls short is in the case, the rip guide, and the cord. The case is the same old generic case Makita has been using for all its sidewinders for years. The saw barely fits, and there's virtually no room for blade storage--2 blades max. I like to have beater blades, new blades, masonry blades, finish blades all in the case. As for the rip fence, it's pretty minimal. The arm is so short that its max rip is a measly 7 or 8 inches. Also, the most you can rip to the right of the blade is 3", and the least you can rip to the left is 3 5/8". The range in between is missing altogether. The hook which allows the fence to slide in under the saw's sole plate should be bent slightly longer to allow you to shove it all the way over, tighten the nut, and rip an accurate 3 1/2"--handy for plywood filler strips for 2x4 framing. Lastly, even though the saw is double-insulated and doesn't require a three-prong cord, it should have one. Even if the ground prong is a dummy prong, it sure helps any tool stay plugged into an extension cord. Hopefully, Makita will figure this stuff out. I should send these comments to the company. Buy the saw anyway. It's a great one.

WL212000SJ Campbell Hausfeld Air Compressor Pump / Motor Kit

overall quality of the pump seems good. my biggest and only issue is the center section near the fan. the original body was longer. this is where the strap mounts over the pump to hold it to the base plate/ tank. the new pumps center is much smaller and when you put the stap on it hits the plastic fan shroud. i modified my strap mount to make this work. once every thing was bolted down it fired right up and built pressure nice and fast. only other issue is the air intake/ cylinder head is missing a plate where the muffler installed on my old pump. not a huge deal

Fit my compressor with no problem, and it works great. All the small parts the i needed. Would buy for this vendor again.

Buy WL212000SJ Campbell Hausfeld Air Compressor Pump / Motor Kit Now

Stanley Bostitch Pressure Reducer AB-9415883

• Genuine OEM Replacement Part #AB-9415883
• Compatible with Stanley Bostitch Compressors.
• What's included : (1) Replacement Stanley Bostitch Air Compressor Replacement PRESSURE REDUCER #AB-9415883
• New, bulk packaged
• Please refer to list below for compatibility

I was a little scepticle when I first seen this because of the price. All of the others I've priced without the manifold was more expensive. I'm very impressed with this I would definitely buy this again.

Buy Stanley Bostitch Pressure Reducer AB-9415883 Now

Fit my Bostich pancake compressor perfectly. Although I do not like the design of the plastic adjuster on it ( thats what broke on my to begin with)

DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer

• Sealed Lube Dual Tech: motor works as an oil free and oil lube unit.
• Tool-free features: adjustable belt hook, nail depth adjustment, jam clearing, 360 degree exhaust
• Uses 1-inch to 2-1/2-inch (25.4-milimeter-65-milimeter) 34 degreecollated nails, rear load;
• Includes carrying case, sample finish nails and safety glasses
• Low profile no-mar pad;Sequential action trigger installed

This is the one.

I had the oportunity to try several 15 guage nailers after deciding that my 16G Porter Cable could not do the job I wanted it.

Don't get me worng. My PC is the best 16G nailer in my arsenal but I needed something more.

I tried the Hitachi 15G, the Senco, and the Bostich.

I then tried the Dewalt and I was hooked. I was ready to buy the Hitachi, but the Dewalt went down to a 1" over the Hitachi 1 1/4" and the balance of the Dewalt just felt better in my hand. I also liked the feel of the trigger, plus the fact that I could access the depth adjustment more readily on the Dewalt over the Hitachi.

I have run about 16 hours of work with the tool so far and I am very happy with it. I run it with oil, since there is no better way to protect the seals and rings. I know that Dewalt advertises that you can run the tool without oil, but do not do it. You will just eat away at the life of the seals and piston rings.

No doubt a winner. Much improved over its previous D51275K.

Buy DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer Now

I bought this nailer 4 months ago and went around and around trying to get nails that worked with it. The angle on Senco DA nails is slightly less than the nails that came with the nailer. I also tried a few after market nails--same deal. Finally I ordered Bostitch DA nails and they are exactly the same as the ones that came with it. Probably they are purchased by DeWalt for the kit. The Senco nails even say that they are for this gun on the package. They shoot 3 or 4 times and jam. Bostitch run great.

-Matt in Wisconsin

Read Best Reviews of DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer Here

This gun is very smooth, it sets the nail just right.

I have used several differant guns professionally and this one is very desireable. If you want to save $20 and get junk that will jam at crunch time buy somthing else. If you want reliable smooth quality get this one....

Want DEWALT D51276K 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer Discount?

I bought this nailer used in mint condition on Amazon. Seems to work fine. I am using Porter and Cable 2 1/2" nails and it shoots them well if you don't slam the nail bolt forward. If I slam it the nails seems to wedge in the delivery ramp and don't feed. A minor thing but it took me a minute to figure out why it was only shooting one nail and then stopped. Since then I've used it with no issues.

Save 54% Off

Bought this to install new hardwood flooring in a rental condo we were renovating and couldn't be happier with my choice. It is easy to use, well-made and I'm certain will last for many, many years to come. I'd never installed hardwood flooring before and after a few test "shots" into some scrap plywood I was successful in laying 120 square feet of 3/4" Maple and 25 square feet of Brazilian Redwood with nary a glitch. Getting the correct angle on the "tongue" of hardwood flooring is really the only skill you need to learn and, once you've got that, it's a breeze and you'll be installing floors that look truly professional.